Annandale Timber & Moulding Co. Pty. Ltd.

ABN 19 009 749 464
ANNANDALE TIMBER & MOULDING CO PTY LTD
11 FRANK STREET . WETHERILL PARK . NSW 2164
PH: 02 9604 1555 . FAX: 02 9604 9200
SKIRTING AND ARCHITRAVESHOME
COLONIAL VICTORIALATE VICTORIANLATE VICTORIAN ArchitravesFEDERATIONPOST FEDERATIONCLASSIC RANGEFINELINE RANGE
BOLECTION & INLAY MOULDSDADO & CHAIR RAILSCORNICESPICTURE RAILSHANDRAILSSUNDRY MOULDINGSCONTACT US

INLAY AND BOLECTION MOULDS

Inlay and Bolection moulds are used to frame inset panels or to create mock panels by planting them on flat surfaces.

In the case of inset panels, use inlay moulds to sit within the recess or rebated Bolection moulds to extend above the recess. Rebated bolection moulds are not suitable for use on flat surfaces.

These moulds may also be used in other applications where a decorative mould is needed.

Bolection moulds
Bolection moulds on door panels
IN-57 44x19mm
IN-382 38x15mm
IN-149 32x14mm
IN-56 40x13mm
IN-1 29x11mm
IN-212 18x10mm
     
IN-4 43x19mm
IN-3 33x13 mm
IN-121 19x10mm
     
BO-6 44x24mm
BO-168 43x15 mm
BO-169 32x12mm
(rebate 8x8mm)
   
BO-230 41x21mm
(rebate 12x10mm)
BO-58 54x31mm
(rebate 13x7mm)
Site Maintained by Spec-Net Pty Ltd